Opto-Isolated USB Smart Cable
User Manual
Page 3
UM019502-0606
Installing the USB Smart Cable and Driver
2. In the Wizard, select
Install from a list or specific location (Advanced);
then click
Next
.
If the Windows Logo testing dialog appears, select
Continue Anyway
.
3. Select
Search for the best driver in these locations
and
Include this location in
search.
4. Browse to the driver directory, one of the following:
<ZDS II Installation Directory>\device drivers\USB
<ZDS II Installation CD>\Device Drivers\USB
5. Click
Next
, and then click
Next
again after the appropriate driver is found.
6. Click
Finish
to complete the installation.
Windows 2000
1. Connect the USB Smart Cable to the host PC for the first time.
The Found New Hardware Wizard should activate automatically.
2. In the Wizard, click
Next
.
3. Select
Search for a suitable driver for my device (Recommended);
then click
Next
4. Select
Specify a location
; then click
Next.
5. Browse to the driver directory, one of the following:
<ZDS II Installation Directory>\device drivers\USB
<ZDS II Installation CD>\Device Drivers\USB
6. Click
OK
, and then click
Next
after the appropriate driver is found.
7. Click
Finish
to complete the installation.
Windows 98SE
1. Connect the USB Smart Cable to the host PC for the first time.
The Found New Hardware Wizard should activate automatically.
2. In the Wizard, click
Next
.
3. Select
Search for the best driver for your device (Recommended);
then click
Next
4. Select
Specify a location
; then browse to the driver directory, one of the following:
<ZDS II Installation Directory>\device drivers\USB
<ZDS II Installation CD>\Device Drivers\USB
5. Click
Next
, and then click
Next
again after the appropriate driver is found.
Note:
electronic components distributor
