2 Safety
ZIMM Screw Jack
6
Version 1.2
2015-01
2
Safety
The ZIMM Screw Jack has been produced to modern standards and
recognised safety regulations. Nevertheless hazards to life and limb of
the users or third parties, or risks of damage to the ZIMM Screw Jack
and other property may arise during use.
The ZIMM Screw Jack may be used only when it is in technically
good condition and in compliance with the instruction manual.
Have any defects rectified without delay.
Do not perform any unauthorised modifications to the ZIMM Screw
Jack.
Fit only original spare parts from ZIMM Maschinenelemente
GmbH + Co KG.
2.1
Use for the intended purpose
The ZIMM Screw Jack is suitable only for lifting, lowering, tilting and
advancing movements within the specified lifting capacity ranges.
Responsibility to ensure correct use lies with the user.
Screw jacks may be used only in the context and within the limits
specified in our catalogues and brochures.
To ensure compliance with the statutory limits for electromagnetic
compatibility, the ZIMM Screw Jack may be used only within industrial
applications as defined in EN 50 081-2.
Use for any purpose other than these intended purposes constitutes
improper use.
If in doubt regarding the application of the ZIMM Screw Jack, consult
ZIMM Maschinenelemente GmbH + Co KG before proceeding.
2.2
Duties of the operating company
Ensure that the ZIMM Screw Jack is operated and maintained only
in compliance with this instruction manual and the rules and
regulations applicable in the country of use.
Ensure that the personnel
– responsible for operating the ZIMM Screw Jack are authorised,
– are trained and qualified for the respective work,
– have read and understood this instruction manual,
– know the applicable safety rules and
– wear personal safety equipment
(safety gloves, safety helmet and safety shoes).
