6 Installation
ZIMM Actuator
14
Version 0.6
2023
6
Installation
CAUTION
Laceration, trapping and crushing hazards!
Switch off the entire system and secure it against switching on
again.
Allow only skilled and trained personnel to perform the work.
Do not remove the covers that are fitted.
Wear personal safety equipment.
Sharp edges!
Laceration hazard.
Wear safety gloves.
CAUTION
High forces are generated!
Material damage to the entire system and the ZIMM Actuator.
Ensure that the following installation conditions are satisfied:
– Limit switches are not overrun.
– For parallelism and angularity tolerances: see section 6.1,
page 15.
– Directions of rotation and movement are correct for all
components.
– Safety clearance between moving and fixed parts is
maintained.
Lack of self-locking!
Material damage to the entire system and the ZIMM Actuator due to
lack of self-locking for spindles with ball screw drive KGT.
Spring pressure brake FDB or brake motor provided.
Make sure that the thrust tube does not reach the hard stop
during assembly.
Summary of Contents for ZA-25
Page 33: ......