14
11 Commissioning
WARNING
Risk of injury caused by falling parts
The product could fall off due to improper product installation in combination with the occurrence of vibrations.
►
During product installation, follow the installation and operating instructions.
►
Use a suitable mounting piece.
►
Use suitable mounting screws.
NOTICE
Non-compliance may result in material damage.
►
Adhere to the maximum on-time to prevent error messages and/or overloading the product.
11.1 Checking operational readiness
NOTICE
►
Only check the operational readiness of the product with suitable electrical consumers.
►
Check all mounting screws for the prescribed tightening torque.
►
Check all connections for leaks.
►
Check the operating pressure via the output sensor signal or a pressure gage connected between the product and
consumer.
►
Check the energy supply.
►
Check that all cable connections were mounted corresponding to the Pin assignment.
►
Check to ensure that there is no warning or fault signal.
►
Check whether the LED lights up green and the product is ready for operation.
Zimmer GmbH • Im Salmenkopf 5 •
77866 Rheinau, Germany •
+49 7844 9138 0 • www.zimmer-group.com
INSTALLATION AND OPERATING INSTRUCTIONS:
AEPN1100-00-A
DDOC01693 / a
EN / 2023-03-20
Summary of Contents for AEPN1100-00-A
Page 2: ......
