Operation Instructions
7.1 Device Description
7
Page 10
Pre-cooling
Once CryoMini is turned on, the device starts to pre-cool to the minimum reachable
temperature. During this phase, the compressor and the capacitor fan work together.
At the same time, the device performs a self-test. During the self-test or pre-cooling,
no entries can be made on the display. Merely the "Menu" button (8) can be
manipulated to reach the configuration menu. When the pre-cooling is sufficient, the
display automatically returns to start screen. CryoMini is now ready for use.
Operation
During therapy, the therapy fan blows cold air through the treatment hose. At the same
time, the compressor / capacitor starts automatically during the treatment to ensure a
constant cooling.
Stand-by mode
If no therapy is performed, CryoMini is in stand-by mode. In order to ensure that
sufficient cool air can be provided at any time, the compressor starts automatically as
soon as a certain temperature is exceeded. An immediate start of treatment is
possible from the stand-by mode.
Recommendation for
optimal treatment
When treatment starts, a waiting time of about 10 min. is recommended after the
precooling. This ensures that the device has reached its maximum cooling capacity.
It is also recommended to turn off CryoMini only for longer treatment breaks or at the
end of the day.
