Operating Instructions
8.4 Display and Buttons
8
Page 15
(5) Mode
Displays the selected operating mode. Upon activation of the menu, the
selection menu appears with the following operating modes:
Series Pulse, Burst - 4 pulses, Burst - 8 pulses, Burst - 12 pulses.
The desired operating mode is selected directly in the corresponding row.
(6) Frequency
Displays the set frequency.
Frequency range: 1 Hz - 22 Hz, adjustable using the right controller. Here the
maximum selectable frequency depends on the selected power level.
(7) Save
Pressing the key opens the field to enter the individual name of a program. The
program is automatically stored in the favourites list.
(8) Counting
direction
Pressing the button sets the counting direction (ascending or descending) for
the number of pulses emitted.
(9) Pulse count
Display of the preselected number of pulses and the currently emitted pulses
as well as the total number of pulses emitted in the case of non-pre-set
pulse number.
Ascending or descending display the counting direction.
Activating the pulse number window opens the entry menu for entering
a pre-selected number of pulses. The pre-set is done in increments of 100.
(10) Reset
In the case of ascending count direction, resets the count to 0, or in the case of
descending count direction resets to the preset pulse count.
(11) Status line
Displays the name of the currently selected program.
Summary of Contents for enPulsPro
Page 1: ...User Manual enPulsPro USA...
Page 2: ......
