INSTALLATION AND OPERATING INSTRUCTIONS:
Motor spindle, HF150-003 series
39
Zimmer GmbH
•
Im Salmenkopf 5
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
EN / 2020-10-22
DDOC00746 / -
23 Declaration of Incorporation
... in terms of the EU Machinery Directive 2006/42/EC (Annex II 1 B)
Name and address of the manufacturer:
Zimmer GmbH
Im Salmenkopf 5
77866 Rheinau, Germany
+49 7844 9138 0
+49 7844 9138 80
www.zimmer-group.com
We hereby declare that the incomplete machines described below
Product designation: Motor spindle
Type designation: HF150-003 series
conforms to the requirements of the Machinery Directive 2006/42/EC, Article 2g, Annex VIIB – Annex IIB, in their design
and the version we put on the market.
The following harmonized standards have been used:
Basic health and safety requirements:
No. 1.1.2., No. 1.1.3., No. 1.1.5., No. 1.3.2., No. 1.3.4., No. 1.3.7., No. 1.5.3., No. 1.5.4., No. 1.5.8., No. 1.6.4., No. 1.7.1., No.
1.7.4.
DIN EN ISO 12100:2011-03 Safety of machinery – General principles for design – Risk assessment and
risk
reduction
DIN EN I62061 Safety of machinery – Functional safety of electrical, electronic and programmable electronic
control systems
DIN EN ISO 10218-2 Industrial robots, robot systems and integration
DIN EN IOS 13849 Safety of machinery – Safety-related parts of control systems
ISO TS 15066 Human-Robot Collaboration
A full list of applied standards can be obtained from the manufacturer.
We also declare that the specific technical documents were produced in accordance with Annex VII Part B of this Directive.
We undertake to provide the market supervisory bodies with electronic versions of special documents for the incomplete
machine through our documentation department, should they have reason to request them.
The incomplete machine may only be commissioned if it has been ascertained, if applicable, that the machine or
system in which the incomplete machine is to be installed satisfies the requirements of Directive 2006/42/EC on
Machinery and an EC Declaration of Conformity has been drawn up in accordance with Annex II 1 A.
Authorized representative for the compilation of
relevant technical documents
Clemens Kimmig
See manufacturer's address
Rheinau, Germany, 2020-10-22
Martin Zimmer
First name, last name
Address
(Place and date of issuance)
(Legally binding signature)
Managing Partner
