Page 36 INSTRUCTION MANUAL CENTRAL COMMAND STATION MX10
Necessary actions in
ESTWGJ:
Enter the
MX10
’s IP address in the box with the red frame:
192.168.1.145
*)
*) This is an IP address entered by the manufacturer. In case a change was made,
it has to be made here, too.
If a
is entered in
“Create-Log-file” in the blue frame,
ESTWGJ
creates a log file, which writes all LAN
commands on the screen. This is not relevant for normal operation, but can be interesting sometimes
(e.g. searching for bugs).
After “Saving” these settings in
ESTWGJ
the connection works.
As described here for ESTWGJ, other interlocking programs can be connected with the MX10.
PC (with interlocking software) and MX10 can also be connected via WIFI.
Therefore it is important that the PC gets an IP address automatically assigned from the router. All
those assigned IP addresses have to be static. Consult the instruction manual of your router.
192 . 168 . 1 . 145
NOTE: MX10 can not communicate via LAN
and
USB at the same time. As soon as the MX10 recog-
nises a valid LAN connection, USB is deactivated.
