INSTRUCTION MANUAL CENTRAL COMMAND STATION MX10, MX10EC Page37
Deleting vehicles from the database (ObjectDB vehicles):
One of the most important functions of the menu point “ObjectDB vehicles” is the possibility to delete
addresses manually (most of the time deleting whole address contingents) from the object database
of the MX10, or of the whole system. Regarding the following steps within the menu point “”ObjectDB
vehicles”) this is rather comfortable:
Scroll with the rotary knob to the first address to be deleted
Button 2 (MENU)
to enter the sub menu
Scroll with the rotary knob to the entry “delete”
Press the rotary knob to actually delete the address
Button
3
(
) resume to the address list (automatically positions the curser beneath the last deleted
address
it is usually the case that the following address shall be deleted, too.
Button 2 (MENU)
to enter the sub menu; this time automatically to the entry “delete”
Press the rotary knob to actually delete the address
Button
3
(
) resume to the address list
etc. (same procedure: button 2 - rotary knob - button 3 - button 2 - rotary knob ...)
Button 2 (MENU)
;
scroll
Undelete
: Deleted addresses stay in the list, but are marked
“DEL” or “deleted”; they can be reestablished via button 2 in
the sub menu and there as “Undelete” (instead of “Delete”) in
the MX10’s object database.
Object lines: address name MAN-bit speed step (1024 steps) direction arrows
Button
1
(
) Displ 1: Address “in” traction name (or number) activation code *)
Button
1
(
): Address PRG F0 F5 F9 F13 F21 MN FS
(Monitor function)
Button
1
(
): Address DCC packets / sec RailCom feedback / sec track format
Button
1
(
) Address feedback (via RailCom) speed (km/h) etc.
Button
1
(
) Address manufacturer Decoder type (if ZIMO) ID
Press
Button
1
(
) LONG: resume to basic display
Button 2 (MENU):
Detailed display, inter alia, with possibility to delete from database
Press rotary knob
screen colour changes to
GREEN
, “BaseCab” - screen
*) Activision codes:
FG object is in the foreground on one controller
HG object is in the LoR of at least one controller
CS this object (loco address) received commands from the computer in the last 5 seconds
HG CS both ….
Menu point ObjectDB consist
Object list
GREEN
Menu point ObjectDB accessory
Object list
GREY
Press rotary knob
Currently you can only choose accessory decoder, MX8, MX9 and
MX1 booster.
.. Accessory decoder screen
Black boxes by default (e.g. switches) correspond to the
RED LED on the MX32, white boxes to the GREEN LED.
… MX8 screen
… MX9 screen
… MX1 booster screen
ATTENTION:
Deleting an address from the MX10’s object database (i.e. the systems centralized data-
base) does
NOT delete
it from
local
databases in controllers (input devices). This means, if an address
is reactivated from a local database (or only is called back into the recall memory), the corresponding
address with all its data from the controller is loaded back into the MX10’s centralised object database.
In order to delete an address completely from the system, it has to be deleted from all devices (control-
ler MX32 with E-6 to the ObjectDB, scroll to the address and delete it with the C-key).
NOTE: Additionally to “manually deleting addresses” as described here, there is also automatic deletion
because a vehicle was not used for a long time or memory overload (the memory can store up to 1000
vehicles including GUI, etc.). The criteria thereof can be configured in the menu point “ObjectDB Auto-
Clear” (depending on the current SW version of the MX10). Lists all active objects (loco addresses and
names) with - eligible by button 1 - real time speed display including direction and MAN state, sending
statistics (DCC packets ordered by type of command), etc. as desired. Detail screen for single ad-
dresses with possibility to delete it from the database, RailCom analysis, ...
NOTE: Depending on the software version, not all lines are available.
