2a
2b
2a. Select the Highest Gear
NOTE!
The highest gear is always the smallest.
While raising the rear of the bike and rotating the pedals by hand, use the right hand trigger shifter to
select the lowest gear (number 6 on the indicator).
2b. Set the Position of the Lower Limit Screw
The upper limit screw controls the position of the rear derailleur when the highest gear is selected.
Using a suitable screwdriver, rotate the upper limit screw until the small gears of the derailleur are
vertically aligned below the upper gear.
• Turn the upper limit screw clockwise to move the derailleur to the right (when viewed from the
back of the bike).
• Turn the upper limit screw anti-clockwise to move the derailleur to the left (when viewed from
the back of the bike).
E
E
E
E
E
Adjusting the Rear Derailleur – Step 2
6
Smallest
(6th gear)
Largest
(1st gear)
Maintenance Instructions
Customer Helpline 01582 670100
