Maintenance Instructions
Customer Helpline 01582 670100
9
Adjusting V-Brakes
H
H
I
Throughout the life of your bike, the front and rear v-brakes may need adjusting if the brake cable
has stretched or the brake arms have been knocked during use.
Adjusting V-Brake Cable Tension
1a. Adjust the Brake Cable
The brake cable must be adjusted to ensure that the brakes are as close as possible to the wheel
rim when no pressure is applied to the brake lever.
Using a suitable spanner or socket, loosen the cable pinch bolt until the brake cable is free to
move.
Pull the brake cable until the brake pads are approximately 2mm/ 0.16”inch from the wheel rim.
Retighten the cable pinch bolt while holding the brake cable in position.
H
I
I
H
1a
2mm
2mm
