background image

18

LIMITED WARRANTY STATEMENT

Extent of Limited Warranty

ZiNk imaging (“ZiNk”) warrants to the end-user customer that the ZiNk products will 
be free from defects in material and workmanship from the date of original purchase 
from ZiNk or an authorized ZiNk dealer or distributor for the durations described 
below:

 

Product Type 

Parts and Labor Warranty

 

ZiNk happy+

 

1 year

 

ZiNk zrolls

 

1 year

 

ZiNk happy

 accessories 

1 year

 
For software products, ZiNk’s limited warranty applies only to a failure to execute 
programming instructions. ZiNk does not warrant that the operation of any product 
will  be  uninterrupted  or  error  free.  ZiNk’s  limited  warranty  covers  only  those 
defects that arise as a result of normal use of the product and does not cover any 
other problem, including those that arise as a result of: (i) improper maintenance 
or modification; (ii) software, media, parts or supplies not provided or supported 
by  ZiNk;  (iii)  operation  outside  the  product’s  specifications;  or  (iv)  unauthorized 
modification or misuse.

if  ZiNk  receives,  during  the  applicable  warranty  period,  notice  of  a  defect  in  any 
product  which  is  covered  by  ZiNk’s  limited  warranty,  ZiNk  shall  either  repair  or 
replace  the  product,  at  ZiNk’s  option.  if  ZiNk  is  unable  to  repair  or  replace,  as 
applicable, a defective product which is covered by ZiNk’s limited warranty, ZiNk 
shall, within a reasonable time after being notified of the defect, refund the purchase 
price of the product.

ZiNk shall have no obligation to repair, replace or refund until the customer obtains 
a return Material authorization (rMa) number and returns the defective product 
to ZiNk.

any  replacement  product  may  be  either  new  or  like-new,  provided  that  it  has 
functionality at least equal to that of the product being replaced. the limited warranty 
on any replacement product will be 90 days from the date that it is shipped to the 
customer or the remainder of the limited warranty on the original product, whichever 
is longer.

ZiNk  products  may  contain  remanufactured  parts,  components,  or  materials 
equivalent to new in performance. ZiNk’s Limited Warranty Statement is valid in any 
country where the covered ZiNk product is distributed by ZiNk.

Transferable

this limited warranty is transferable.

Limitations of Warranty

tO tHe eXteNt aLLOWed BY LOcaL LaW, NeitHer ZiNk NOr itS tHird PartY 
SuPPLierS Make aNY OtHer WarraNtY Or cONditiON OF aNY kiNd, WHetHer 
eXPreSS  Or  iMPLied  WarraNtieS  Or  cONditiONS  OF  MercHaNtaBiLitY, 
SatiSFactOrY QuaLitY, aNd FitNeSS FOr a ParticuLar PurPOSe.

Limitations of Liability

to the extent allowed by local law, the remedies provided in this Limited Warranty 
Statement are the customer’s sole and exclusive remedies.

tO  tHe  eXteNt  aLLOWed  BY  LOcaL  LaW,  eXcePt  FOr  tHe  OBLiGatiONS 
SPeciFicaLLY Set FOrtH iN tHiS LiMited WarraNtY StateMeNt, iN NO eVeNt 
SHaLL ZiNk Or itS tHird PartY SuPPLierS Be LiaBLe FOr direct, iNdirect, 
SPeciaL,  iNcideNtaL  Or  cONSeQueNtiaL  daMaGeS,  WHetHer  BaSed  ON 
cONtract, tOrt, Or aNY OtHer LeGaL tHeOrY aNd WHetHer adViSed OF 
tHe POSSiBiLitY OF SucH daMaGeS.

Local Law

this  Limited  Warranty  Statement  gives  the  customer  specific  legal  rights.  the 
customer may also have other rights which vary from state to state in the united 
States, from province to province in canada, and from country to country elsewhere 
in the world.

to the extent that this Limited Warranty Statement is inconsistent with local law, this 
Limited Warranty Statement shall be deemed modified to be consistent with such 
local  law.  under  such  local  law,  certain  disclaimers  and  limitations  in  this  Limited 
Warranty Statement may not apply to the customer. For example, some states in 
the united States, as well as some governments outside the united States (including 
provinces in canada), may: (i) preclude some or all of the disclaimers and limitations 
set forth in this Limited Warranty Statement from limiting the statutory rights of a 
consumer (e.g., united kingdom); (ii) otherwise restrict the ability of a manufacturer 
to  enforce  such  disclaimers  or  limitations;  or  (iii)  grant  the  customer  additional 
warranty rights, specify the duration of implied warranties which the manufacturer 
cannot disclaim, or allow limitations on the duration of implied warranties.

tHe terMS iN tHiS LiMited WarraNtY StateMeNt, eXcePt tO tHe eXteNt 
LaWFuLLY PerMitted, dO NOt eXcLude, reStrict, Or MOdiFY, aNd are iN 
additiON tO, tHe MaNdatOrY StatutOrY riGHtS aPPLicaBLe tO tHe SaLe 
OF tHe ZiNk PrOductS tO SucH cuStOMerS.

How You (the Customer) Can Obtain Service and Support 

to obtain warranty service, an rMa number or support, please call ZiNk imaging 
customer  care  at  877-711-ZiNk  (9465).  if  warranty  service  is  needed  at  any  time 
during  the  warranty  period,  you  will  be  asked  to  furnish  a  sales  receipt/proof  of 
purchase from ZiNk or an authorized ZiNk dealer or distributor indicating the date of 
purchase, amount paid and place of purchase. 

Summary of Contents for HAPPY+





















Reviews: