PAGE 4
ZINTRA STICKS
CURVED - NARROW & WIDE
zintraacoustic.com
STEP 1
1.1 BEGIN WITH FIRST CURVED RIB.
STEP 2
RIB’S SUPPORT INTALL
1.2 INSERT EACH OF THE CROSSRUNERS INTO THE
CORRESPONDING PRE-CUT RECTANGULAR HOLES IN
THE CURVED RIB.
1.3 WITH THE CURVED RIB ALIGNED PRESS
CURVED RIB DOWN INTO NOTCH UNTIL
FULLY SEATED.
1.4 REPEAT STEPS 1.1-1.3 FOR EACH CURVED RIB
UNTIL THE ENTIRE ASSEMBLY HAS BEEN
COMPLETED.
CURVED RIBS INTALL
2.1 FOLD RIB’S SUPPORT.
2.2 INSERT THE RIB’S SUPPORT INTO THE
CORRESPONDING PRE-CUT RECTANGULAR HOLES IN
THE CURVED RIB.
2.3 WITH THE CURVED RIB ALIGNED FIX IT
WITH A SELF DRILLING SCREW.
2.4 REPEAT STEPS 2.1-2.3 FOR EACH RIB’S SUPPORT
UNTIL THE ENTIRE ASSEMBLY HAS BEEN
COMPLETED.
