PAGE 5
ZINTRA STICKS
CURVED - NARROW & WIDE
zintraacoustic.com
STEP 3
FRAME INSTALL
STEP 4
ZINTRA STICKS INSTALL
3.1 USE A LASER LEVEL OR SPIRIT LEVEL TO MARK ALUMINIUM POSITION
ON THE WALL.
3.2 SECURE CROSSRUNNER TO WALL IN THE SUITABLE LOCATION
FOR YOUR SITE.
3.3. FIX TO WALL WITH FASTENERS TO SUIT APPLICATION.
4.1 FOLD ZINTRA STICK.
4.2 INSERT THE ZINTRA STICK INTO THE
CORRESPONDING PRE-CUT RECTANGULAR HOLES IN
THE CURVED RIB.
4.3 REPEAT STEPS 4.1-4.2 FOR EACH ZINTRA STICK
UNTIL THE ENTIRE ASSEMBLY HAS BEEN
COMPLETED.
FINISHING INSTALL
A. CAP THE END OF THE CROSSRUNNER BY PRESSING
THE SUPPLIED PVC CAPS UNTIL SECURE.
B. TO CONNECT MULTIPLE ZINTRA CURVED SYSTEMS
TOGETHER USE THE SUPPLIED ZINTRA CONNECTORS.
INSERT ONE OF THEM HALF WAY IN THE CROSSRUNNER,
AND THE OTHER HALF INTO THE ADJACENT CROSSRUNNER.
ADJUST AS NEEDED FOR ALIGNMENT.
A.
B.
STEP 5
