6
Connect
There are three ways shown below to connect this player to your TV set. Please choose one to apply.
Basic connection:
Power Cord: Connect the DC input in the device.
Audio cable output: Connect the cables to TV set.
CVBS video output (480i or 576i): Connect to TV set
Advanced connection:
Power Cord: Connect the DC input in the device.
Audio cable output: connect the cables to TV set.
Component video cable for HD video output (720p, 1080i): connect to TV set.
HDMI connection:
Power Cord: Connect the DC input in the device.
HDMI output (720p, 1080i): connect to HDMI input of TV set. The HDMI port sends digital video and
audio signal through the cable.
Setup
Please check the battery of Remote Control first, and then start the initial setup.
Initial setup
When plugged in the power at the first time, after the booting logo, the setup page should pop up to
start the initial setting. The first item is the menu language. Please setup the menu language for OSD.
Use
▲▼
button to select the language and press “ENTER” to confirm.