23
z
Only applies in AP mode.
Options explanations
WPS Mode:
As Registrar – add other enrollee to this device. The device
supports “As Registrar” mode currently.
WPS Config Method:
PIN
– Personal Identification Number: input 8-character code. The PIN code
setting must be the same as the enrollee’s setting.
PBC
– Push Button communication: When using the PBC, push the WPS
button on the device and then connect the wireless client in 5 seconds.
Add Enrollee PIN Code
: The text filed only appears when selecting
PIN
for
WPS Config Method. Input the PIN code for authentication.
AP Security Information field explanation
:
Label
Description
WPS Configured
It could be No and Yes.
“No”: It is not configured yet.
“Yes”: PIN or PBC has been selected to use.
WPS Status
It could be Unused, Idle, Start WSC Process.
“Unused”: It is not enable WPS yet.
“Idle”: The WPS is enabled but not active yet.
“Start WSC Process”: Click “Start WPS Config”
button and the process
begin.
“Configured”: At least one Client connects to the
device.
SSID
It shows the supporting ESSID of the current
device.
Auth Mode
It could be Open, WPA Personal or WPA2
Personal. Please open the page “Wireless
settings, Security” to configure the security
options such as authenticate Mode, encryption
type and the pre-Shared key.
Encryption Type
TKIP, AES, TKIP/AES.
