X10 Broadband Router Use’s Guide
26
table and then click "Delete ".
When finished making your changes on this screen, click the Save button to save
these changes.
4.6.2 Connection Filtering Configuration
To control a certain client PCs accessing the Internet based on time. You can filter
Internet access for local clients based on IP addresses, application types, (i.e.,
HTTP port), and time of day. For example, this screen shows that clients in the
address range 192.168.10.20-50 are permanently restricted from using FTP (Port
21), while clients in the address range 192.168.10.60-70 are blocked from browsing
the Internet (port 80) from Monday to Friday and from 0:00 AM to 11:00 PM.
Figure 4-15
z
Status.
You can choose to turn on or turn off the Connection Filtering
Configuration by click start/stop button.
z
If checked, the undefined item in IP Address list is allowed to access Internet;
Unchecked means reverse.
z
Rule Name:
Enter any name you want to use for the Application Name.
z
Source IP address:
Enter the IP address that you wish to apply this Access
Control rule.
z
Protocol.
Select the protocol type (TCP, UDP, FTP, HTTP).