Page 14 of 32
802265 v3.05 09.20 HT BCS Compact Commercial Instructions
Section 3
Booster Heater
3.1
Product Description
The boost unit is a compact, electronically
controlled auxiliary water heater. It is intended
to provide pre heating of water before it enters
the Zip HydroTap G4 boiling tank. The Booster
is supplied with the BCSHAV model. However,
it may be later installed, as an accessory for the
BCS model, to increase its delivery.
339 mm
Booster Specifications:
Rating
Unit
Nominal Power Rating
2.2
kW
Nominal Current
10
A
Electric Supply 50Hz AC
230
V
Elect flex and plug (black) - 1 metre length (with 90º Australian plug)
10
A
Fixed Flow Rate
1.2
L/min
Minimum water pressure
200
kPa
Note
Note 1:
water connection
Blue marking: water in
Red marking: water out.
The braided hoses cannot be length-
ened.
Note
Note 2:
The electrical cable length
is 1.0 metre.
Note
Note 3:
Position the Booster within
reach of the fixed hose lengths, keep-
ing the Booster as close as possible
to the Command Centre inlet/outlet
fittings.
Note
Note 4:
Ensure the Booster heater
is mounted in an upright position (as
shown) with a horizontal base.
Mount base
horizontally
