background image

Zip Hydroboil Electronic - Installation & Operating Instructions - 86584 - July 2008

Page 9 of 16

Operating Procedures

Tap Operation

Safety feature.

Zip Hydroboil has a unique safety device designed to reduce the incidence of accidental operation of the tap.The tap can
be “Locked” to prevent the Hydroboil from dispensing hot water

In order to “lock” the tap, ensure the safety button is protruding from the right hand side of the control panel and the
locked indicator is illuminated 

This can be achieved by pressing the button and simultaneously rotating it until the groove in the head of the button
faces  toward the body of the appliance. In this position an internal spring will push the button out. Once the button is in
the extended position, the tap will be “Locked” and unable to dispense hot water.

Disengage safety feature.

Press and simultaneously rotate (aprox 90 degrees) the safety button on the right hand side of the control panel, until it
latches in the closed position, and the unlocked indicator is illuminated.

Warning: The unit is now capable of dispensing boiling water without the safety feature.

Dispensing Boiling water:

Zip Hydroboil is fitted with a  safety, two-way cool-touch safety tap for instant boiling water.

Normal operation

(for filling cups and small containers)

To activate the tap, press the safety button on the right side of the control panel and while holding the button in, gently
push the lower end of the tap paddle inwards and boiling water will flow until the tap paddle is released.

Continuous operation

(for filling, tea pots, saucepans and large containers )

Press the safety button on the right side of the control panel and while holding the button in, Lift the tap paddle until it
locks into a horizontal position, the button can now be released and boiling water will flow until the paddle is returned to
its normal vertical position. This operation allows a vessel to be filled without holding your hand where it may be affected
by steam.

Normal operation

Continuous operation

locked

Press to unlock

Press to unlock

Locked / unlocked indicators

retha@chilli-b.co.za

www.chilli-b.co.za | 012 809 4026

antonius@chilli-b.co.za

www.chilli-b.co.za | 012 809 4026

Summary of Contents for 203461

















Reviews: