background image

Page 28 of 28                   801912UK - Commercial Boiling, chilled and sparkling user manual - Sept 2016- v2.04

Cleaning

General cleaning

Do not use strong, corrosive spray or abrasive cleaners / chemicals. 

Clean the casing, tapware, external filter, piping and all other fittings with a soft cloth 

and mild soap and water. 

Do not spray water over the tap as it may damage the low-voltage electronics.

Caution: Should any of the plastic fittings accidentally come into contact with cleaners 

with a PH level less than 4, hypochlorite, hydrogen peroxide or any other aggressive 

chemical the affected component must be replaced immediately.

Command-Centre

TM

 units must never be located near, or cleaned with water jets. 

Avoid using airborne pesticides near the Command-Centre

TM

.

Contact details

Website: www.zipwater.com/uk

Email: sales@zipindustries.co.uk

Facsimile: 01362 692 448

Telephone: 0345 6 005 005

Head Office

 

Zip Water UK

14 Bertie Ward Way

Dereham

Norfolk NR19 1TE

As Zip policy is one of continuous product improvement, changes to specifications may 

be made without prior notice. Images in this booklet have been modified and may not 

be true representations of the finished goods.

For terms of warranty please see the back page of the installation guide, download the 

latest copy from www.zipwater.com/uk

The terms “Zip” and “HydroTap” are registered trade marks of Zip 

Heaters (Aust) Pty Ltd. 

Zip products described in this publication are manufactured under 

one or more of the following patents: AU675601, AU637412, 

AU635979, GB0422305, GB2065848, US4354049, US5103859, 

US5099825 and SA2006/08043. Other patents are in force and 

patent applications are pending.

Summary of Contents for 801912UK





























Reviews: