801912UK - Commercial Boiling, chilled and sparkling user manual - Sept 2016- v2.04
Page 3 of 28
Tap safety
The safety lock feature is provided to prevent boiling water flowing if the red
BOILING control is inadvertently activated.
This function can be activated and deactivated from either the tap or from the
White FILTER light
Filter light off
This indicates the filter is operating within its normal specified lifespan.
Filter light flashing slowly
The light will flash slowly when the filter is due for replacement and the LCD
will show ‘Filter Change. See ‘To change the filter’ page 23.
•
To allow the safety setting to be changed using the touch screen, (see
page 22).
•
To enable or disable the tap safety lock, (see page 22).
•
For hot isolation, (see page 22).
To dispense boiling water with the safety lock off
Touching
the red BOILING button allows the dispensing of boiling water.
To dispense boiling water with the safety lock on
Place a finger on the safety lock, then touch the red BOILING button,keeping
both fingers in position to dispense boiling water.
To dispense chilled water
Touch the blue CHILLED button to dispense chilled water.
touch screen display (located on the Command-Centre
TM
).
To activate the safety lock from the tap
(Ensure ‘Allow safety settings change’ is selected, see page 22).
First place a finger over the safety lock, then touch the CHILLED button, keep
both fingers in position for a period of approximately ten seconds.
To deactivate the safety lock from the tap
First place a finger over the safety lock, then touch the CHILLED button while
keeping both fingers in position for a period of approximately ten seconds.
To dispense water
To dispense sparkling water
Touch the blue CHILLED button and red BOILING button together,
simultaneously to dispense sparkling water.
Elite HydroTap
®
G4
