03
Installation instructions & user manual
804544UK V2.03 Oct 2018 - Zip Econoboil
Technical support
Tel: 0345 6 005 005 Email: service@zipindustries.co.uk www.zipwater.co.uk
WARNINGS AND PRECAUTIONS
!
This manual contains important safety and installation instructions for the Zip Econoboil.
Please read all warnings, installation requirements and installation instructions before installing any
Zip Econoboil. This system must be installed in accordance with water supply byelaws, current IEE
regulations and relevant local authority byelaws.
Warnings
•
The Zip Econoboil
must be earthed. The resistance of the earth connection from each exposed metal part
must be less than 1
Ω
.
•
All installation and service work must be completed by trained and suitably qualified tradespeople. Faulty
operation due to unqualified persons working on this product, or any other Zip product may void warranty
coverage.
• Never attempt to install a Zip Econoboil instant boiling water heater without reading all of the applicable
instructions.
• Do not remove the cover of the Econoboil under any circumstances without first isolating it from the power
supply.
• In hard water areas mineral scale accumulation in the boiling chamber of the Zip Econoboil may become a
problem, consideration should be given to the maintenance required. A suitable form of water treatment may
be necessary.
• The Zip Econoboil instant boiling water heater is not intended for use by young children or infirm people
without supervision.
• Young children should be prevented from having access to ensure that they are not able to use or play with
the Econoboil.
• Do not use strong, corrosive or abrasive cleaners to clean the case of the Econoboil.
• The ambient temperatures this Econoboil must operate within are 5ºC - 50ºC.
• The Econoboil is intended only for indoor use and should never be installed outdoors or be exposed to the
elements of nature.
• The Econoboil must not be positioned in an area that may be cleaned by a water jet. The Econoboil must not
be cleaned by a water jet.
• Frost protection: If the Econoboil is located where ambient air temperature could fall below 5ºC when the
Econoboil is not in use, do not turn off the Econoboil electrically. This safeguard does not offer the same
protection to the connecting pipework and fittings.
•
As the installer, it is your responsibility to supply (if necessary) and install all valves as required by local
regulations and relevant standards.
•
The Econoboil is rated for 230V 50Hz AC operation.
•
Due to the process of continuous improvement, Zip reserves the right to change details mentioned in this
manual, without notice.
•
Visit www.zipwater.co.uk to ensure you have the latest copy of this document.
