2
INSTALLATION INSTRUCTIONS & USER MANUAL
T210012 V1.00 FEB 2018 -ZIP HYDROCHILL 10
TECHNICAL SUPPORT
TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
PRECAUTIONS AND GENERAL RECOMMENDATIONS
TABLE OF CONTENTS
Precautions and recommendations ....................................................................... 2
Before installing the HydroChill ............................................................................ 3
Product approvals & product description .............................................................. 4
Technical features ................................................................................................ 5
Technical data .................................................................................................... 10
Installation ........................................................................................................... 11
General CO2 cylinder safety guidelines ............................................................. 17
Filtration (inc.Ultra violet (UV) filtration) ............................................................... 18
Sanitisation .......................................................................................................... 20
Maintenance ........................................................................................................ 21
Safeguarding the environment ............................................................................ 22
Warranty .............................................................................................................. 23
Contact details ..................................................................................................... 24
• Appliance for internal use only.
Place the unit away from water
jets.
• Always connect the water cooler
to a water main that supplies
wholesome drinking water only.
• Before each installation, the unit
must be sanitized by an authorized technician.
• After installation, ensure that the unit is not resting on the power cable.
•
Check that the unit is level and that it is resting on a surface with sufficient
load bearing capacity, in an environment that is suitable for its dimensions
and its use.
• Before any maintenance or cleaning operation is carried out, remove the plug
from the socket or disconnect the power supply.
• Ensure that the product is not sited close to sources of heat.
• To guarantee adequate ventilation, leave at least 10 cm of space around the
unit.
• Install the product in a clean, dry, well-ventilated environment. The product
is designed to function in environments with a temperature range of between
5°C and 32°C - Climate Class N.
•
Take care not to damage the cooling fluid circuit: it is filled with R290, which
is a highly flammable gas. It is essential to ensure that the tubes of the
refrigerant circuit are not damaged.
• Ensure that it is possible to disconnect the power supply either by removing
the plug or via a two-pole circuit-breaker, with a contact separation of at least
!
