background image

04

805812 v1.04 05.20 HydroChill Install Instructions

WARNINGS AND PRECAUTIONS

Intended use

The Zip HydroChill is a high-capacity drinking water dispenser, comprising an under-counter chiller with a 
bench-mounted font to dispense chilled and ambient-temperature still water.
Zip HydroChill HCS models feature the addition of sparkling water, with a carbon dioxide gas cylinder to 
carbonate the chilled water.

Safety

•  This equipment requires regular maintenance to guarantee the drinking quality standards of the chilled 

water with added carbon dioxide.

•  Do not allow anyone to operate the machine unless suitably trained.
•  Keep the machine in good working order and do not allow any modifications to be made to it unless 

these have been authorised by the manufacturer.

•  Before using the machine, read this section of the manual carefully; it instructs operators in the correct 

use of the machine, and warns of improper use which may be hazardous.

Improper use

•  This machine is designed for the use and conditions envisaged in this manual, in compliance with Machine 

Directive 2006/42/EC. 

•  The use of the dispenser for any purposes other than those for which it was designed is not allowed, 

under any circumstances. Likewise, its use in any way other than that indicated in this manual is forbidden. 

•  This machine is not intended to be used by people (including children) with reduced physical or sensory 

capacities, or with a lack of experience and knowledge, unless under supervision and with the instructions 
of someone responsible for their safety. Make sure that children do not play with the dispenser. 

•  For the purposes of your safety, and in accordance with the current legislation, any repair operations on 

the machine must be carried out by Zip Water.

•  Do not alter or tamper with the internal dispenser components; if they do not work well, contact the 

Service Centre.

•   Do not use liquids other than those indicated.
•   Do not place any objects on the dispenser. Do not place the dispenser on top of any other object.
•   If you believe the dispenser to be damaged, contact Zip Water.

Due to the process of continuous improvement, Zip reserves the right to change details mentioned in this 
manual, without notice. Visit 

zipwater.com

 to ensure you have the latest copy of this document.

CO

2

 (carbon dioxide) cylinder warnings

•  Pressurised container, contains gas under pressure and may explode if heated.
•  Do not expose to temperatures exceeding 50°C. Protect from sunlight.
•  Do not expose to naked flame or any incandescent material.
•  Avoid shock. Do not pierce or burn, even after use.
•  Keep out of reach of children.
•  Store in a location with a volume of no less than 50 cubic metres for each 2.64kg 

bottle of CO

2

.

•  Use only in ventilated areas. High concentration of gas may cause asphyxiation.
•  Use only in an upright position.
•  An approved pressure regulator must be used.
•  Use according to the Material Safety Data Sheet (MSDS).

Summary of Contents for HydroChill Te-Mix Aqua 15





































Reviews: