background image

Page 24 of 24                                 HydroTap Installation and Operating Instructions - 89650UK - August 2011 v1.02

The standard cup referred to in this publication is 167 ml (6 fl oz). 
The standard glass is 200 ml (7 fl oz). 
The terms “Zip” and “HydroTap” are registered trade marks of Zip Heaters (Aust) Pty Ltd. 
Zip products described in this publication are manufactured under one or more of the following 
patents: AU675601, AU637412, AU635979, GB0422305, GB2065848, US4354049, US5103859, 
and US5099825.  Other patents are in force and patent applications are pending. 

Head Office

Zip Heaters (UK) Ltd
14 Bertie Ward Way
Dereham
Norfolk NR19 1TE

Website:  www.zipheaters.co.uk
 sales@zipheaters.co.uk
Telephone: 0845 602 4533
Facsimile:  01362 692 448.

Warranty

Certain warranties may be implied by law into your contract with Zip. The warranty provided below is additional to these 
implied warranties and nothing set out below shall limit your statutory rights or rights at law. 
Zip Heaters (UK) Ltd warrants that, should any part fail within 12 calendar months of installation, that part will be 
repaired or replaced free of charge by Zip or its Distributor or Service Provider, except as set out below, provided 
the appliance is installed and used strictly in accordance with the instructions supplied, and that failure is not due 
to accident, misuse, abuse, unsuitable water conditions, or to any alteration, modification or repair by any party not  
expressly nominated by Zip. 
No costs are payable by the customer other than any mileage or travelling-time charges incurred by a Zip Service 
Provider or the cost of removal, cartage and re-installation of any component of the appliance if it needs to be returned 
for repair to Zip or its Distributor. 
This warranty does not cover damage resulting from non-operation of the appliance, the use of non authorised parts or 
consequential damage to any other goods, furnishings or property.
No warranty applies to the life of any filtration cartridge installed with the appliance as cartridge life may vary according 
to water quality and the rate of water consumption.  
Zip does not exclude, restrict or modify any liability that cannot be excluded, restricted or modified or which cannot, 
except to a limited extent, be excluded, restricted or modified as between the owner or user and Zip under the laws 
applicable. 
Furthermore, this warranty does not displace any statutory warranty, but, to the extent to which Zip is entitled to do 
so, the liability of Zip under any statutory warranty will be limited at Zip’s option to the replacement of the appliance or 
supply of equivalent appliance, the payment of the cost of replacing the appliance or acquiring an equivalent appliance, 
or the payment of the cost of having the appliance repaired or the repair of the appliance.

Registering Your Purchase

Registering your Zip installation on the Zip website may help to establish date of installation should it become necessary 
to service the appliance under terms of the Zip warranty. To register your installation go to www.zipheaters.co.uk and 
look under the heading “Warranty”.

As Zip policy is one of continuous product improvement, changes to specifications may be made without prior notice. 
Images in this booklet have been modified and may not be true representations of the finished goods.

Summary of Contents for HydroTap All-In-One BC 60/85A

























Reviews: