804050US v1.27 06.21 CS175 Install Instruction
Page 5 of 28
Thank you for purchasing a Zip HydroTap. Please read and follow these instructions carefully to ensure safe
and trouble-free service.
What is the Zip HydroTap ?
The Zip HydroTap CS faucets are electronically controlled, filtered, Chilled and Sparkling water, drinking
systems for kitchens and tea rooms.
The HydroTap Command Centers are under bench drinking water appliances with a dispensing faucet
mounted on a sink or bench, which may be used for commercial applications. These units utilise a
conventional refrigerant compressor to chill the water and utilise a CO
2
gas cylinder to carbonate the chilled
water. The CS models will dispense chilled water, factory set to 3 - 5 °C (37 - 41 °F). These models are NOT
designed to be used for sanitary fixtures.
In addition, there are various energy saving options accessible via the main menu. The CO
2
bottle and the
water filter cartridge will require periodic replacement and are covered by a limited OEM warranty.
It is important that the Installation be done safely, correctly and completely, in order to utilise all the benefits
the HydroTap can provide. Classic Faucets may be ordered with an Accessibility Lever Kit. The accessibility
levers are supplied with Braille caps for the visually impaired.
This manual contains important safety and installation instructions for the Zip HydroTap.
Safety
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the appliance.
For products sold in Europe, this appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
Refrigerant
The Zip HydroTap Command Center contains R134A refrigerant under pressure. Maintenance of the
refrigeration unit must be carried out by an accredited service provider or qualified refrigeration technician.
Qualifications
If the power cable is damaged it must be repaired only by a qualified technician. To avoid hazards, all
Installation procedures must be carried out by a suitably qualified tradesperson. The power cable and power
outlet must be in a safe visible position for connection.
Venting
Ensure the faucet body is located so the faucet outlet safely dispenses into the sink bowl area.
Lifting
Take care when lifting the Zip HydroTap Command Center. Some units may exceed safe lifting limits. If you
feel this is beyond your personal capabilities, please seek assistance with the lift. The weights of the units are
marked on the packaging. Do not lift the Command Center by the front cover or any connections at the top
rear of the unit. Refer to the technical specifications for the weight of your product.
Important Safety Instructions
!
