background image

Page 4 of 24 

 

802698 - G4  User Guide - June 2015 - v2.00

Tap operation -

 

Mixer

The Mixer tap lever is operated as 
a conventional ‘Flick Mixer’. The hot 
side is marked with a red stripe and 
the cold side with a blue stripe, for 
dispensing cold to warm water. 

Lifting the handle up will decrease the 
flow rate and lowering the handle will 
increase the flow rate. Lift the handle 
all the way up to turn the tap off.

When the handle is moved towards 
the blue mark, the temperature is 
decreased and when moved towards 
the red mark, the temperature is 
increased. The final temperature will 
be dependant on the temperature of 
the incoming cold water.

The spout may be swivelled, left or 
right, through 170

°

 for convenience.

To dispense Boiling water: 

 with the safety ON.

Tapping the 
illuminated RED safety 
button twice, with one 
finger, will cause the 
safety red light to flash 
for a few seconds. 
While flashing, turn 
the rotary control (as 
shown) to dispense 
boiling water.
(See section G for 
safety settings)

Tap operation - Boiling water

Rotate for Boiling water

Safety

To dispense Boiling water: 

 with the safety OFF.

When the RED safety light is OFF, turn the rotary control (as shown) to 
dispense boiling water.

Vent 

 Boiling models

Summary of Contents for HydroTap G4 Celsius Series

























Reviews: