COMPATIBILITY
This expansion module is designed to work only with Zipabox.
HANDLING
Do not drop, knock or shake the module. Rough handling can break
internal circuit boards and connectors.
ENVIRONMENT
Do not expose the module to excessive heat or cold, as it can damage or
shorten the life of electronic circuit boards.
If possible, dispose this module at a recycling center. Do not dispose of
this module with the household waste.
SPECIFICATION
Power supply:
from Zipabox
Operating temperature:
-
10° ~ +40° C
Operating humidity:
5 ~ 95% RH
Dimensions:
29 x 87 x 46 mm (without antenna)
Weight:
62g (with antenna)
Communication frequency:
2.4 GHz
Communication protocol:
ZigBee
Communication range:
up to 30m indoor or 70m outdoor
UNPACKING
ZigBee expansion module consists of:
1x expansion module
1x 2.4 GHz antenna
• Connect antenna by screwing it clockwise to the connector on the
module
CONNECTING DEVICE
1. Disconnect Zipabox from power;
2. Align connector of ZigBee expansion module to expansion Slot 2
of Zipabox (or to module connected into Slot 2);
3. Join module and Zipabox together until gap between them is
completely closed.
INSTALLATION/MOUNTING
Mount together with Zipabox.
INTERFERENCE
All wireless devices are subject to interference, which could affect device
performance.
REPARING
Do not attempt to repair this product. There are no user-serviceable parts
inside.
WATER-RESISTANCE
This product is not water-resistant. Keep it dry. Moisture will corrode the
inner electronics.
CLEANING
Use a dry cloth to clean this product. Do not use harsh chemicals, cleaning
solvents or strong detergents.
COPYRIGT
The contents of this manual is subject to copyright protection. Copying and
reproducing is prohibited without prior written permission. Information in
this document is subject to change without prior notice. Check
www.zipato.com for updates.
