SETUP
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
27
ZI-RAM80C
Check tamper oil
Oil capacity: 0,8 litre
Oil type: SF 15W-40
To check the engine oil level, place the rammer after 10 minutes with the engine off on secure,
level ground
Clean pollution in the area of the sight glass (F).
Check the oil level on sight glass (F). The oil level is OK if the sight glass is full or ¾ full.
If no oil is visible oil must be supplied.
Tilt the tamper until the roll off bar (I) is on the ground.
Loosen the oil screw (F).
Fill in oil
Thigten the oil screw
Place tamper in upright position
Check fuel level
Fuel capacity: 2,7 litre
Fuel type: ROZ 95
The ZI-RAM80C is being powered with petrol (min. octane 95)
Pay attention to all security regulations in connection with fuel.
Remove fuel tank cap, check fuel level by sight.
If refueling is necessary, pay attention to all security regulations regarding refueling, refuel only
with filter.
Refueling only with filter.