OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
29
ZI-RAM80C
Warm start
Open fuel cock (K) and (c) entirely
Set Choke lever (8) to „OPEN“
Bring throttle lever (A) into idle speed position
Main switch (3) ON
Recoil start: Grip the handle (7) of the recoil starter, pull it back slightly until you feel resistance,
let it roll back, pull it out briskly in one pull entirely.
To start to compact bring the throttle lever (A) cautious into max. speed position!
Stop the machine
Bring throttle lever (A) into idle speed position
Main switch (3) OFF
Close the fuel cock (K) and (c) entirely.
NOTE
A sudden switch off the engine at full
throttle can cause engine damage.
ACHTUNG!
Open the choke only when the throttle is at
idle otherwise the rammer can start moving.
On first use or for motors that were not used
since long time perhaps is to pull the starter
rope several times so that fuel reaches the
carburetor.
