ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
26
ZI-RPE160C
D A N G E R
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
W A R N I N G
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
C A U T I O N
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
N O T I C E
A safety note designed in this way indicates a potentially dangerous situation which, if
not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
15
ASSEMBLY
15.1
Check scope of delivery
After delivery, check the machine immediately for transport damage and missing Parts.
15.2
Assembly
The machine is delivered pre-assembled. The parts that have been dismantled for transport must
be assembled before commissioning / use.
1.
Handle bar assembly:
Insert the handle bar into the holder and fix it
with M10X25 hexagonal bolts, spring washers
and washers.
2.
Transport wheel assembly (if used)
-
Tilting the machine up
-
Hook the transport wheels (1) with the bolt
(2) into the base plate (3) of the machine.
-
Gently tilt the machine back onto the
transport wheels
