INHALT / INDEX / INDICE/
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
27
ZI-MOS145A / ZI-MOS4TA
14.1.2
Check the spark plug
Clean of debris with metal brush.
Check spark plugs match of 0.6-0.7mm
14.1.3
Carburettor
NOTE
Carburetor adjustments should be carried out only by trained specialist personnel!
14.1.4
Motor oil change (4-stroke-engine)
Motoroil check:
Regularly prior to each
operation!
Remove the oil filler
cap/dipstick
Minimum: LOWER LIMIT
Maximum. UPPER LIMIT
Motoroil change:
After 100 working hours
Drain the oil into a suitable
container
Fill in new motoroil (15w40)
14.2
Storage
If the machine will be stored longer than 30 days:
Let the machine cool down.
Empty Tank completely, avoid fuel spillage.
Remove and clean thread head and cutter blade
Fit the blade guard
Clean the machine and dry
Store in a dry, out of reach of children place, well packaged (protection against cuts)
14.3
Disposal
Do not dispose the machine, machine components fuel and oil in residual waste.
Contact your local authorities for information regarding the available disposal options.
When you buy at your local dealer for a replacement unit, the latter is obliged to
exchange your old.