SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
18
ZI-RPE160C
11
SAFETY
11.1
Intended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
Compacting small or average areas, small basements, terraces, pavements and gateways.
A normal intended use is compacting: sand, gravel, slightly cohesive, block- or stone pavement
Any manipulation of the machine or its parts is a misuse, in this case
ZIPPER-MASCHINEN
and its sales partners cannot be made liable for ANY direct or indirect damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
factors.
W A R N U N G
The compactor will be delivered without any gasoline or oil.
Read also the separately packed operation manual of the engine
manufacturer
Ambient conditions
The machine may be operated:
humidity
max. 70%
temperature
+5°С to +40°С (+41°F to +104°F)
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
Prohibited use
The operation of the machine outside the stated technical limits described in this manual is forbidden.
Operation of the machine function without emergency stop button or impeller box with open doors is
prohibited.
The use of the machine not according with the required dimensions is forbidden.
The use of the machine not being suitable for the use of the machine and not being certified is
forbidden.
Any manipulation of the machine and parts is forbidden.
The use of the machine for any purposes other than described in this user-manual is forbidden.
The unattended operation on the machine during the working process is forbidden!
It is not allowed to leave the immediate work area during the work is being performed.
