SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
25
ZI-ASA550ESA
If other bags made of other materials are used, they must have the same physical
strength.
Never leave the machine unattended, especially when children are nearby!
Improper use or disregard of the explanations and instructions in this manual will invalidate all
warranty and compensation claims against ZIPPER Maschinen GmbH.
11.2
User Qualification
The machine is designed for operation by one person. Prerequisites for operating the machine
are physical and mental aptitude as well as knowledge and understanding of the instruction
manual. Persons who are not capable of operating the machine safely due to their physical,
sensory or mental abilities or due to their inexperience or ignorance must not use it without
supervision or instruction from a responsible person.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a
qualified electrician or carried out under the guidance and supervision of a
qualified Electrician.
11.3
Security instructions
To avoid malfunction, machine defects and injuries, read the following security instructions!
Replace damaged, missing, or failed parts before using the machine. Keep the machine
in safe working condition!
The machine is solely designed for indoor use.
Shut down the machine and disconnect it from the power supply before adjustment,
cleaning, maintenance or servicing work, etc. Before starting to work on the machine,
wait until all tools or machine parts have come to a complete standstill and secure the
machine against unintentional restart.
Make sure that machine parts that can heat up have cooled down completely before
starting maintenance work.
Check the screw connections of the machine for strength before each use.
Only use perfect tools that are free of cracks and other defects (e.g. deformations).
Remove tool keys and other adjustment tools before switching on the machine.
Choose a level, vibration-free and non-slip surface for the installation location.
Ensure sufficient space around the machine!
Ensure sufficient light conditions at the workplace to avoid stroboscopic effects.
Work in a well-ventilated area! If necessary, use dust protection. The machine must not
be operated for more than one ½ hour per day due to dust emission inside a room.
Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid
slippery floor.
Keep the area around the machine free of obstacles (e.g. dust, chips, cut parts, etc.).
The machine may only be operated by one person.
Respectively trained people shall operate and maintain the machine.
Always stay focused when working. The operation of the machine when being tired, as
well as under the influence of alcohol, drugs or concentration influencing medicaments is
forbidden.
Always work carefully and with the necessary caution and never use excessive force.
Do not overload the machine.
Never leave the machine running unattended! Before leaving the working area switch the
machine off and wait until the machine stops.
Do not allow other people, particularly children, to touch the machine or the cable. Keep
them away from the work area.
Make sure there is nobody present in the dangerous area. The minimum safety distance
is 2m.
