GETTING STARTED
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
25
ZI-RWM99
C A U T I O N
A safety note designed in this way indicates a potentially dangerous situation which, if
not avoided, may result in minor or slight injuries.
N O T I C E
Such a safety note indicates a potentially dangerous situation which, if not avoided,
can lead to property damage.
Despite all safety regulations, your quick horse sense and appropriate technical
suitability/training remains the most important safety factor when operating the machine!
16
GETTING STARTED
16.1
Unpacking and checking scope of delivery
Remove the protective carton. Immediately after unpacking, check whether the equipment is
complete. Check if any parts have been damaged. If something is wrong or missing, do not
use the machine and contact your retailer immediately. Later complaints due to transport
damage or incomplete delivery can no longer be accepted.
16.2
Setting up the device
Select a suitable location for setting up the machine. The floor at the place of installation must
be firm and level and be able to support the weight of the machine. In addition, the place of
installation must comply with the applicable regulations for workplace safety and must have a
suitable power connection.
Special anchoring of the machine to the ground is not necessary for correct operation.
16.3
Assembly
16.3.1
Mounting the threaded shaft
As standard the machine is supplied with a universal cone adapter. The spring built into the
adapter body cannot be removed. The threaded shaft can be removed to allow the installation
of alternative adapters, e.g. for motorcycle wheels.
1.
Fasten the threaded shaft (1) to the main shaft (3) using
the tool supplied (2).
1
2
3
