MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
32
ZI-RWM99
18
MAINTENANCE
W A R N I N G
Dangerous electrical voltage! The elimination of faults or defects by
persons not specially trained in handling electricity (electricians) can result
in serious injuries or even death. Therefore, malfunctions or defects may
only be remedied by persons specially trained in working with electricity!
The machine requires little maintenance and only a few parts have to be serviced:
- Before each operation, check that the safety devices are in perfect condition.
- Check the screw connections for tightness at least once a week.
- Regularly check that the warning and safety labels on the machine are in perfect and legible
condition and replace them if necessary.
Malfunctions or defects that could impair your safety may only be remedied by qualified
personnel!
19
CLEANING
N O T I C E
The use of solvents, aggressive chemicals or abrasives can lead to damage to
paintwork and other property on the machine!
Free the machine from dust and other deposits after each use. Only use water and, if
necessary, a mild detergent for cleaning! The use of compressed air or high-pressure cleaners
is not recommended. The latter can reduce the operational suitability of the machine or
shorten its service life, because water (moisture) could get inside the machine when it is used.
20
TRANSPORT
N O T I C E
The wheel balancer may only be transported in its original packaging.
The wheel balancer may only be transported in its original packaging. Always switch off the
motor before transport and allow the machine to cool down if necessary.
Use a forklift truck with suitable capacity to move the packed machine.
21
STORAGE
Thoroughly clean the machine before storage, empty liquid tanks if necessary and dispose of
liquids in accordance with national regulations. Pack cleaned machine and store in a dry and
clean place.
21.1
Disposal
Observe the national waste disposal regulations. Do not dispose of
the machine, machine components or equipment in residual waste. If
necessary, contact your local authorities for information on the
disposal options available.
If you buy a new machine or an equivalent device from your
specialist dealer, he is obliged in certain countries to dispose of your
old machine properly.
