OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
33
ZI-ASA550ESA
13.3
ON-OFF-Switch
(I): ON-position
(0): OFF-position
13.4
Starting the machine
Check that the extraction hose is attached firmly to the adapter of both dust collector
and woodworking machine.
Check if the sawdust collecting bag is tightened well.
Start the dust collector by switching to the ON-position (I).
Now start the woodworking machine.
13.5
Stopping the machine
Switch off the woodworking machine first.
Turn off the dust collector by switching to OFF-position (0).
13.6
After operation
N O T I C E
After completing the work, the woodworking machine must be switched off first,
and then the dust collector:
Turn off the machine by pressing the ON-OFF-switch (0).
Disconnect the machine from the power supply by removing the plug from the socket.
13.7
Automatic operation
If you connect a woodworking machine to the dust collector, you can turn on/off the dust
collector from the woodworking machine.
-
Connect the woodworking machine to the automatic socket-outlet (2).
13.7.1
Automatic operation - Starting
-
Put the switch of the dust collector (1) to the AUTO-position
-
When you start the woodworking machine, the dust collector is turned on
too.
13.7.2
Automatic operation – Stopping
When you turn off the woodworking machine, the dust collector switches off automatically
with a time delay.
