ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
27
ZI-BRM52EST
Pull up the lower handle and fix the handle
with the lower handle clamp.
Install the upper handle clamp.
Turn the clamping loose by hand and then
close lever for fixing.
Fix the upper handle with the upper handle
clamp.
When unfold the mower avoid pinching or
trapping any cables!
16.3
Checklist before Start-up
NOTICE
The use of paint thinners, petrol, aggressive chemicals or abrasives leads to material
damage to the surfaces! Therefore use only mild detergents for cleaning!
Clean the machine and remove dirt and grass if necessary.
If the air filter is dirty, blow the filter cartridge from the inside by moving a jet of dry
compressed air up and down. Continue until all dust has been removed. Replace the air
filter with a new one if necessary.
Check the carburettor for external dirt and dust and clean it with dry compressed air if
necessary.
Check the nuts and bolts for tightness, paying particular attention to the knife. (Screws or
bolts loosened by vibrations can lead to accidents)
16.3.1
Checking/refilling engine oil
NOTICE
Too low an oil level will damage the engine and shorten the life of the machine.
Therefore, check the engine oil level before each start and top up if necessary.
