TRANSPORT
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
34
ZI-BRM52EST
19
TRANSPORT
WARNING
Never lift or transport the machine with the engine running!
Secure the machine in its position (tying up, jamming the wheels)
Empty fuel tank completely to avoid fuel leakage
20
STORAGE
To reduce the risk of fire, keep the engine, silencer, battery compartment and fuel tank
free of grass, leaves or excessive grease.
Allow the product to cool for at least 30 minutes before storage.
Before storage, clean the mower thoroughly and store it in a dry, frost-free place.
Never store the mower with fuel in the tank inside a building where it can reach an open
flame or spark.
If the fuel tank needs to be emptied, this should be done outdoors.
If the machine is not used for a longer period of time (>30 days):
Empty the oil or fuel tank.
Remove the spark plug and pour a few drops of engine oil into the cylinder. Using a rope
starter, turn the engine a few times so that the oil is well distributed inside the cylinder.
(Clean spark plug before reuse!)
21
CLEANING
N O T I C E
Incorrect cleaning agents can attack the paint on the machine. Do not use solvents,
nitro thinner or other cleaning agents that could damage the machine's paint.
Regular cleaning is also a basic rule for the safe operation of the machine and a long lifetime of the
machine. Once every season, the drive wheels should be cleaned internally. Remove both wheels.
Clean the gear wheel and the wheel gear rim of grass and dirt using a brush or compressed air.
If the machine is stored for longer than 30 days:
Connect a water hose to the water adapter and let the machine run for a short time.
Do not tilt the mower!
22
DISPOSAL
Do not dispose of your machine in residual waste. Contact your local authorities for
information on available disposal options. If you buy a new vibratory plate or equivalent
from your dealer, he is obliged in certain countries to dispose of your old machine
properly.
