ERRORE. LO STILE NON E DEFINITO.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
24
ZI-COM50-2V5E / ZI-COM50-2V510E
11.2
Security instructions
Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator
and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
•
•
Keep your work area dry and tidy! An untidy work area may cause
accidents. Avoid slippery floor!
•
Make sure the work area is lighted sufficiently!
•
Work only in a well ventilated area!
•
Do not overload the machine!
•
Always stay focused when working. Reduce distortion sources in your
working environment. The operation of the machine when being tired, as
well as under the influence of alcohol, drugs or concentration influencing
medicaments is forbidden!
•
Only one person shall operate the machine
•
The machine must be operated only by trained persons (knowledge and
understanding of this manual), which have no limitations of motor skills
compared with conventional workers.
•
Do not allow other people, particularly children, to touch the machine or
the cable. Keep them away from your work area
•
Make sure there is nobody present in the dangerous area. The minimum
safety distance is 2m
•
Use personal safety equipment: ear protectors, safety goggles and work
wear when working with or on the machine!
•
•
The plug of an electrical tool must strictly correspond to the socket. Do
not use any adapters together with earthed electric tools
•
Each time you work with an electrically operated machine, caution is
advised! There is a risk of electric shock, fire;
•
Protect the machine from dampness (causing a short circuit)
•
When working with the machine outdoors, use extension cables
suitable for outdoor use
•
Use power tools and machines never in the vicinity of flammable liquids
and gases (danger of explosion)
•
Check the cable regularly for damage
•
Do not use the cable to carry the machine or to fix the work piece
•
Protect the cable from heat, oil and sharp edges
•
Avoid body contact with earthed components
