OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
23
ZI-DS2V-AKKU
23
13
OPERATION
Operation of the spray gun
Start:
Slide the safety lock upwards and press the spray lever on the spray gun.
Stopp:
Release the spray lever
Warning: Please keep the safety lock in the place when not in use to prevent from
switching on uninentionally.
Set of nozzles:
The pressure sprayer is equipped with two nozzles and can be set for 3 different applications:
mist, jet-and fan-shaped spray for different uses.
13.1.1
Main nozzle:
The main nozzle can spray 2 modes: mist and jet, these modes are alternative changed by
rotation the nozzle. Mist mode is mainly for large area spray nearby, jet spray is used for long
distances.
13.1.2
Fan nozzle:
Fan nozzle is for fan shaped spraying, this mode is
specially suitable for large area spraying and long
distance.
13.1.3
Change the nozzle:
The nozzles on the spray gun can be easily changed
by turning on the changing switch. Upper position
main nozzle activated lower positon fan nozzle activeted.
Main nozzle
Fan nozzle
Changing switch
Extension nozzle
Quick change
adapter
Press the copper cut
Safety lock
On/Off
trigger
LED Light