MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
24
ZI-DS2V-AKKU
24
13.1.4
Use spray Extension
Pull the quick release back to the gun and
remove the main jet. When the clutch is
tightened you can use the spray extension and
release the clutch again. The nozzle can be
adjusted by turning and pulling.
The spray extension, you can rotate through
360 ° and thus spray on hard to reach places.
13.1.5
Adjust the Spray Gun Holder
14
MAINTENANCE
Do not store any chemicals in the tank, this can lead to deposits and clogging the filter.
Make sure that the cap is securely on the tank.
Clean the filters regularly to ensure good performance.
14.1.1
Cleaning
After each use, release pressure (set pressure sprayer always to a vertical position),
empty the tank, clean thoroughly and rinse with clear water.
Afterwards dry the pressure sprayer (open tank,…)
Do not dispose of residual liquids through the sewer system
To avoid any chemical reactions clean the pressure sprayer before use of other pesticides.
To clean the valves and the nozzle of the spray tube operate the pressure sprayer with clean
water (possibly with the addition of detergent).
Never use aggressive cleaning agents containing solvents or gasoline.
In case of external contamination of the lid and container, thoroughly clean the thread and thread
O-ring area.
14.1.2
Storage
Note
: Please remove the pressure hose from the water tank.
There should be no water in the hose to drain the tank by the differential pressure.
During storage, charge the battery at least once every three months to protect the battery from
damage.
Keep the sprayer in dry rooms, safe places out of the reach of children.
Do not place any other objects on the sprayer.
The sprayer should not be stored at temperatures above 35 °c or in direct sunlight.
Extension nozzle
Adjustment of the sprayer gun
holder see figures.
