SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
23
ZI-HEK40V-AKKU
Power tool use and care:
Do not overload the machine. Use the correct power tool for your application. The correct power
tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition
that may affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
Battery tool use and care:
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs
may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Safety instructions for hedge trimmers:
Keep all body parts away from the cutter. Never attempt to remove the clippings while the blade is
running or hold material which is to be cut. Before removing any jammed clippings, switch off the
machine. A moment of inattention when using the hedge trimmer may result in serious injuries.
Carry the hedge trimmer by the handle when the blade has stopped. When transporting or storing
the hedge trimmer, always remove the battery and pull on the guard. Handle the machine carefully
to reduce the risk of injury from the blade.
Hold the electric power tool by the insulated handle surfaces only, as the cutter may touch
concealed power lines. If the cutter comes into contact with a live line, metallic parts of the
machine may become energised and cause an electric shock.
Before switching on the hedge trimmer, ensure that the working area is free of stones and pieces
of wire. Look out for them while cutting and search the hedge for concealed objects, such as wire
fences.
Additional safety instructions:
Switch the machine off and remove the battery under the following conditions:
–
if the machine is left unattended;
–
before checking, cleaning or performing other work on the machine;
–
if the machine starts vibrating excessively.
While cutting, ensure that there are no persons (particularly children) or animals in the working
area. Ensure that children do not play with the machine.
Use the machine only in daylight or in good artificial lighting.
Use the machine in dry conditions only. Protect it from rain and moisture.
Autogoods “130”
130.com.ua
