¡ERROR! UTILICE LA PESTAÑA INICIO PARA APLICAR ÜBERSCHRIFT 1 AL TEXTO QUE DESEA QUE APAREZCA
AQUÍ.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
22
ZI-HS10TN / ZI-HS12TN / ZI-HS14TN
14
ASSEMBLY
A.
Mounting the wheel axle and wheels: Slide the
wheel axle into the two holes on the frame and
attach the wheels to it. Secure the wheels with a
cotter pin and attach wheel caps.
B.
Expanding the wedge ram: Remove the R-pins
(1).
Keeping the support stand against the wedge,
lower both control handles to expand wedge ram
(2). Insert the R-pins to secure the cylinder to the
splitter (3). Secure the R pins with the cotter pin
into the spring tabs (4).
N O T I C E
For this process, it is necessary to have
the log splitter ready for operation.
Hydraulic oil filled, motor connected to
main supply.
C.
Removing the
support
stand: Release both control
handles to retract the wedge ram. Remove the
support stand.
