SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
23
ZI-KM1000
Never operate the machine on slopes where the angle is over 20°!
Regular breaks reduce the security risk to loss of control due to fatigue.
Walk! Never run with the machine
Be especially careful when you turn the machine or move backwards!
Never use the machine on soft ground. Risk of tipping!
Take especially care, if the ground contains many stones or roots. An unattended stalling of the drill
might easily cause an accident!
Use personal safety equipment: ear protectors, safety gloves in EN 388, class 3111, safety shoes S1,
safety goggles or face protection when working with the machine!
Never operate the machine without or with soft shoes!
Danger of burns! During the operation flow of hot exhaust gases and engine parts such as the
muffler and engine become hot.
WARNING: Gasoline is highly flammable!
Stop the engine before refuelling
Smoking and open flames are prohibited during refuelling.
Do not refuel when the engine and carburettor are still very hot
Refuel only outdoors or in a well ventilated area.
Avoid contact with skin and clothes (fire hazard).
Check after refuelling tank cap and check for leaks.
Spilled fuel is to wipe immediately.
Keep the fuel in suitable containers only
Make sure the fuel does not overflow. If the fuel overflows, the engine must not be started. Remove
any dirt from the appliance and prevent any attempt at ignition until fuel fumes have evaporated.
Damaged fuel tank or other tank cap must be replaced immediately
After the operation the fuel cock must be closed (if available)
Do not operate in an enclosed or confined areas. Exhaust contains poisonous carbon monoxide. The
exposure can cause unconsciousness and death
.
If the fuel tank has to be emptied it must be done outdoors. Keep the drained fuel in a specially
designated container or dispose of carefully
Never leave the machine running unattended! Before leaving the working area switch the machine
off and wait until the machine stops.
Never remove the fuel tank cap when the engine is running or hot
Switch of the engine and remove the spark plug:
Before check, clean or work on the machine
Before refueling
Always if you leave the machine
