ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
26
ZI-KM1000
12.1.4
Shift lever
Install shift lever with bolts and nuts.
Note: you should install the shift lever
into mounting hole “1” for new
machine after 100 hours or if walking
speed becomes very slow you can
adjust the shift lever to mounting hole “2”.
12.1.5
Brush
1.
Slide the left brush (outer brush threads white!) onto the brush rod (A)
2.
Insert the brush rod through the drive shaft from the left.
ATTENTION! Make sure that the grooves of the brushes engage in the cams of the drive disc.
3.
Slide the right brush onto the brush rod.
ATTENTION! Make sure that the grooves of the brushes engage in the cams of the drive disc.
4.
Insert mounting disc and big washer (B)
5.
Tighten safety nut M6 (C)
12.1.6
Accessories
KM1000AFB-dust collector:
KM1000SSD-snow blade:
