ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
27
ZI-KM1000
12.1.7
Assembly instruction snow blade:
Snow blade assembly :
1.
Mount two wheels on the snow
blade with bolts.
2.
Mount two support pillars onto
snow blade. (see picture)
3.
Mount the support pillar (in the
middle) onto the snow bladed.
Snow blade assembly onto machine:
It is recommended to disassemble
the brush first, when using the snow
blade. Afterwards mount the support
pillars onto the machine as shown in
pictures.
12.1.8
Assembly instruction Dust collector
Dust sweeper assembly:
1.
Mount two holders onto the dust
collector with bolts.
2.
Place the rods onto the sweeper
Duste sweeper assembly onto machine:
Put the supporter onto the machine.
Mount the dust collector onto the
machine as it shown on the picture.
