SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
21
ZI-RMM94H
21
12
SAFETY
This section contains information and important notices for safe commissioning and handling of
machine.
For your own safety, read these operating instructions carefully before putting the
machine into operation. This will enable you to handle the machine safely and
prevent misunderstandings as well as possible damage to property and persons. Also
observe the symbols and pictograms used as well as the safety instructions and
hazard warnings!
Intended use of the machine
The machine is intended exclusively for the following activities:
With the ZIPPER tyre changer ZI-RMM94H tires can be mounted, dismantled and inflated on rims.
ZIPPER-MASCHINEN
assumes no responsibility or warranty for any other use or use
beyond this and for any resulting damage to property or injury.
12.1.1
Technical Restrictions
The machine is intended for use under the following ambient conditions:
Relative humidity:
max. 70 %
Temperature (for operation)
+5° C bis +40° C
Temperature (for storage and/or transport)
-20° C bis +55° C
12.1.2
Prohibited Use / Forseeable Misuse
Operation of the machine without adequate physical and mental aptitude
Operating the machine without appropriate knowledge of the operating instructions
Changes in the design of the machine
Operating the machine outdoors.
Operating the machine in a potentially explosive environment
Operation of the machine without functioning or missing guards
Remove the safety markings attached to the machine.
Modify, circumvent or disable the safety devices of the machine.
The prohibited/hazardous use or disregard of the information and instructions presented in this
manual will result in the voiding of all warranty and damage claims against Zipper Maschinen
GmbH.
User Requirements
The physical and mental suitability as well as knowledge and understanding of the operating
instructions are prerequisites for operating the machine. Persons who, because of their physical,
sensory or mental abilities or their inexperience or ignorance, are unable to operate the
machinery safely must not use it without the supervision or instruction by a responsible person.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified
electrician or carried out under the guidance and supervision of a qualified Electrician.
General Safety Instructions
To avoid malfunctions, damage and health hazards when working with the machine, in addition to
the general rules for safe working, the following points must be observed:
Before commissioning, check the machine for completeness and function.
