ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
24
ZI-RPE120GYN
14
SAFETY
This section contains information and important notes on safe commissioning and handling of the
machine.
For your own safety, read these operating instructions carefully before putting the
machine into operation. This will enable you to handle the machine safely and
prevent misunderstandings as well as personal injury and damage to property. In
addition, observe the symbols and pictograms used on the machine as well as the
safety and hatard information!
14.1
Intended Use of the Machine
The machine is intended exclusively for the following activities:
For compacting soils (e.g. granular soils consisting of gravel and sand or mixtures of both) and
for vibrating paving stones, bricks, etc. on small to medium-sized areas.
The rubber mat should only be used to vibrate paving stones, bricks and the like! Other materials
such as gravel, chippings etc. can be processed without a rubber mat.
ZIPPER-MASCHINEN
accepts no responsibility or warranty for any other use or use
beyond this and for any resulting damage to property or injury.
14.1.1
Probibited Applications / Hazardous Misapplications
-
Operation of the machine without adequate physical and mental aptitude
-
Operating the machine without corresponding knowledge of the operating instructions of
the vibratory plate or the engine manual.
-
Changes in the design of the machine
-
Operating the machine in a potentially explosive environment
-
Operating the machine indoors or in closed areas
-
Operation of the machine without functioning or missing mudguards
-
Operation of the machine in hard soil, frozen soil and mixed soil containing fragments of
Bricks.
-
Remove the safety markings attached to the machine.Modify, circumvent or disable the
safety devices of the machine.
-
Use of the machine for the transport of persons
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and damage claims against
ZIPPER-MASCHINEN
.
14.2
User Requirements
The machine is designed to be operated by one person. Always operate the machine from behind.
Never stand next to or in front of the machine when the engine is running.
The prerequisites for operating the machine are physical and mental aptitude as well as
knowledge and understanding of the operating manual.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Put on personal protective equipment before starting work with/on the machine.
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the instruction and supervision of a qualified electrician.
14.3
General Safety Instructions
To avoid malfunctions, damage and health hazards when working with the machine, the following
points in particular must be observed in addition to the general rules for safe working:
Before each use, check that the machine is in perfect condition. Ensure that all guards are
in the correct place and in working order and that all nuts, bolts, etc. are firmly tightened.
Ensure adequate lighting conditions in the working and surrounding areas of the machine.
