OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
41
ZI-RWM84
18.5.1
Manual data entry
When manually entering data, the values are entered with the keyboard on the control panel.
18.5.1.1.
Determining and setting the distance value A
18.5.1.1.
Determining and setting the nominal diameter D
The nominal diameter D is indicated on the
tyre (see graphic left).
Enter the value using the Fn key and the
corresponding arrow keys (D+/D-) (see
chapter 18.3.1 Shortcut keys).
18.5.1.1.
Determining and setting the nominal size W
The nominal sizw is indicated on the tyres
(see graphic left).
Alternatively, use the caliper to determine the
nominal diameter W. For this
purpose
, place
the heads of the caliper on the left and right
side of the rim and read the value from the
scale on the caliper.
Press
key <T and W+ to activate the manual
entry.
Enter the value using the corresponding arrow
keys (W+/W-).
After proper mounting of the tyre on the
threaded
shaft, pull out the special gauge to
the inner rim edge.
Read the
distance
value A from the scale.
Enter the
value
using the corresponding Fn
key and the arrow keys (A+/A-) on the
control panel (see chapter 18.3.1 Shortcut
keys).
